 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Material: | NMO | Micron Filtration: | 20-2000 Micron |
|---|---|---|---|
| Bag Size: | 7"x17",7"x32" | Seam Treatment 1: | WS-Fused Seam |
| Seam Treatment 2: | SE-Stitched Seam | Bottom Shape1: | R-Semi-circle |
| Bottom Shape 2: | V-Traingle | Seal Ring: | SS Ring |
| High Light: | liquid filter bag,high efficiency filter bags |
||
50 micron rated Nylon NMO mono filament filter bags with SS ring
The Monofilament and multifilament filter bag can be taken out and cleaned repeatedly, so it is economical , each thread is composed of many thiness filaments with same diameters twisted together, and then woven according to certain longitude and latitude density to form a certain mesh.In the filtration process, the particle with bigger diameter than the mesh holes will be intercepted on the surface, the smaller size particles cna run through the mesh hole and enter into the downstream.As a result , surface filtration is achieved, smooth surface is also easy to be cleaned.
Features
Seam treatment: ultrasonic welded or thread stitched
Seal ring options: Polypropylene or polyester SDS, STS, Zinc coated steel or stainless steel snap fit rings.
Ring attachment: Ultrasonic welded or thread stitched
Micron range:1,3,5,10,25,50,75,100,125,150,200 micron are available.
Efficiency: Nominal rating, 85% contaminant particle retention efficiency with a single pass.
Surface treatment: Fiber migration and extractable free glazed media surface treatment.
Media grade: Exclusively FDA compliant media , silicon free, and oil free.
Optimum replacing pressure differential 0.10 Mpa, Max 0.18 Mpa
Broad chemical compatibilities.
Technical Specifications
| Bag size | Filter Area(m2) | Volume(Litre) | Max.flow(m3/h | Diameter | Length |
| P1S | 0.25 | 7.9 | 20 | 7” | 17” |
| P2S | 0.5 | 17 | 40 | 7” | 32” |
| P3S | 0.08 | 1.3 | 6 | 4” | 9” |
| P4S | 0.15 | 2.5 | 12 | 4” | 15” |
| The above dimension meet international standard.We also supply bags filter as per customers’ special requirements. | |||||
Chemical Compatibility
| Filter media | Acids | Bases | Solvents | Oxidizing | Temp. |
| Polyester | Good | Good | Excellent | Limited | 150-170 |
| Polypropylene | Excellent | Excellent | Good | Excellent | 90-110 |
| Nylon | Fair | Good | Excellent | Fair | 150-170 |
| PTFE | Excellent | Excellent | Excellent | Excellent | 250-300 |
Micron/Mesh Conversion Table( Nylon /NMO)
| Micron | 1000 | 840 | 710 | 590 | 500 | 420 | 350 | 300 | 250 | 200 | 180 | 150 |
| Mesh | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 100 |
| Micron | 100 | 90 | 75 | 60 | 53 | 44 | 37 | 30 | 20 | 15 | 10 | 5 |
| Mesh | 150 | 170 | 200 | 230 | 270 | 325 | 400 | 500 | 625 | 1000 | 1250 | 2500 |
Applications:
Auto coating & paint
Water purification& processing
Pharmaceutical
Food& beverage
Bulk &fine chemicals
Electronics
Shipping way & Package details :
By sea / air / express
Shanghai / Ning Bo/Tianjin
Carton Box Dimension: 40cmx50cm x60 cm
Gross weight: 12 kgs per box
Qty inside: 100 pcs P1S
How to replace the filter bag
Change-out Pressure Differential: The recommended bag filter change-out pressure differential across the bag media is 0.10MPA ( 15 PSI). Continuing beyond this point will result not only in rapid flow rate reduction and contaminant unloading, but also increase the risk of filter rupture. The max differential pressure allowed is 0.23 MPA( 35PSI).
Removal of use filter: During operation, the filter media many be embedded into perforated on the basket under excessive pressure, making it difficult to remove the bag filter.When this happens, don’t use excessive force to pull the bag, as it will break the ultrasonic welding line and detach the seal ring form the bag body. To safely remove the bag, shake the basket rapidly and then use a spine motion to separate the bag from the basket, slowly pull the use bag filter out.
Contact Person: Mr. Zhang
Tel: +8613917877783
